Helmets

Original peak with button fastening to make your helmet even more refined and unique

Ear Pad for the helmets Shoei GT-Air, Neotec and J-Cruise

Replacement centerpad for Shoei XR1100 (Type-B) Helmet.

The CNS-1 Pinlock face shield fits Shoei Neotec and GT Air helmets and provides a wider and taller field of vision than its predecessor.

Replacement centerpad for Shoei XR1100 (Type-B) Helmet.

Shoei Micro Ratchet Rubber Cover - Gt-Air Ii_Neotec Ii_J-Cruise

Replacement visor for shoei helmets Fits: NXR  RYD X-SPIRIT III

Shoei NXR2 Replacement Helmet Cheek Pad Replacement helmet cheek pads for NXR2 helmets

Shoei NXR2 Replacement Helmet Cheek Pad Replacement helmet cheek pads for NXR2 helmets

Shoei Neotec Ii Lower Aero Deflector - Chin Curtain Base Plate

Shoei Neotec Ii Chin Curtain H (Leather)

Shoei Pinlock Anti-Fog Insert for CWR-1/CW-1/CNS-1/CNS-3 Shields Fits the following Shoei Helmets: Neotec / NXR / TZ-X / X Spirit II / X-Twelve / ...

If the visor of your helmet is damaged or worn, you have the right replacement here. Features: available as clear, tinted or mirrored version easy...

Replacement visor for shoei helmet. Fits: NXR  RYD X-SPIRIT III  

The CNS-1 Pinlock face shield fits Shoei Neotec and GT Air helmets and provides a wider and taller field of vision than its predecessor.

Replacement Center Pad ECE for RJ PLATINUM-R (J-WING)

Shoei Ear Pad D Suit X-Spirit Iii_Ryd

Replacement centerpad for Shoei XR1100 (Type-B) Helmet.

The Shoei VFX-W Cheekpads are replacement cheek pads for Shoei VFX-W Helmets. All cheek pads are interchangeable between all helmet sizes.  

Replacement centerpad for Shoei VFX-W Helmets. 

Shoei Anti-Fog Film CWR-F2/CWR-F2R NXR2 Replacement Helmet Visor Pinlock Always keep a clear view. PINLOCK® EVO anti-fog lens, clear. A silicone...

Shoei Pinlock Anti-Fog Films (CWF-1_CPB-1) DKS056 Fits : CWF- 1 CPB- 1

Shoei X-Spirit Iii Standard Rear Flap Kit Wide

Shoei Pinlock Anti-Fog Insert for CNS-2 Shields  Fits the following Shoei Helmets: Hornet / Hornet-DS  

The Chin Curtain reduces wind turbulence in the lower part of the face and the noise level in the helmet. With mesh insert for a pleasant inner hel...

Shoei Cw-1 Qrsa Screw Kit

If the visor of your helmet is damaged or worn, you have the right replacement here. Features: available as clear, tinted or mirrored version easy...

Replacement Visor for  Shoei Neotec 2 Flip Front Helmet.

  The CJ-2 is a replacement Pinlock-ready Visor for Shoei J-Cruise Helmets.

Replacement visor for shoei helmet. Fits: NXR  RYD X-SPIRIT III  

Replacement visor for shoei helmet Fits: J.O open Face Helmet

Replacement visor for Shoei helmets. Fits: NXR  RYD X-SPIRIT III

The CJ-2 is a replacement Pinlock-ready Visor for Shoei J-Cruise Helmets.

Replacement Helmet visor screws for Shoei VFX-W Helmet Visor Fits VFX-W 3 to a set  

Replacement Center Pad For GT-AIR II_J-CRUISE II (TYPE-N

Replacement Center Pad For RYD (TYPE-K) Helmet.

Replacement Center Pad ECE for RJ PLATINUM-R (J-WING)

Replacement Center Pad for Shoei GT-Air Helmet.   

Replacement cheek pad set for shoei XR1100_TZ-X Type B Helmet.  

Replacement cheek pad set for shoei XR1100_TZ-X Type B Helmet.  

Shoei X-Spirit 3 Marquez Motegi 3 TC-2 Helmet Loaded with below features: When Going Flat Out On A Motogp Bike, You Do Not Have Any Time To Take ...

NXR/RF-1200 Upper Air Intake. Vents are held on with a screw and adhesive, both come with the new vents.

Shoei NXR2 Upper Air Intake (Shine Red) Fits  NXR 2 Upper ventilation units to replace the original parts or to customise the helmet. For opening...

Shoei NXR2 Upper Air Intake Fits  NXR 2 Upper ventilation units to replace the original parts or to customise the helmet. For opening and closing...

Shoei NXR2 Upper Air Intake (Matt Black) Fits  NXR 2 Upper ventilation units to replace the original parts or to customise the helmet. For openin...

Shoei NXR2 Upper Air Intake (Grey) Fits  NXR 2 Upper ventilation units to replace the original parts or to customise the helmet. For opening and ...

Shoei NXR2 Upper Air Intake (Black) Fits  NXR 2 Upper ventilation units to replace the original parts or to customise the helmet. For opening and...

Shoei NXR2 Top Air Outlet  Fits  NXR 2 Ventilation outlet for replacing the original part or for customizing the helmet. For opening and closing ...